Behrmann Company

- BESF Box Ventilator

EXHAUSTO BESF Box Ventilator is intended for use as an exhaust or supply fan. It can be installed in-line in the duct or at the termination points. Typical uses are: residential kitchen exhaust, general exhaust applications and combustion air supply. For indoor installation only.

- Chimney Automation System

EXHAUSTO's Chimney Automation System (CASV) is for installation and use with multiple and/or modulating boilers and water heaters. It can be used in conjunction with almost any type of appliance and fuel, whether it be forced draft, atmospheric or condensing design.

- Mechanical Draft Fan

Mechanical draft fan for installation at the chimney termination point, vertically or for side-wall venting. Assures a negative pressure in the entire chimney or stack system. Discharges horizontally (vertically, if side-wall vented) at a high velocity. The fan housing is hinged and the top can be opened for easy service and access to stack. For use with gas, wood or solid fuel.

- EBC 30

The EXHAUSTO EBC 30 Modulating Pressure Control can monitor and maintain a constant draft or pressure by varying the speed of the fan(s) or the position of an actuator. It can be used with EXHAUSTO models RS, RSV, RSIF, BESF, BESB and MDF. The EBC 30 consists of a control box and XTP-sensor with 6' silicone tubing and a stack probe. The XTP monitors the draft pressure at the appliance outlet while the control box receives a signal from the XTP, which is used to increase or decrease the fan speed.

- Fans

EXHAUSTO fans are designed and manufactured to be the best kitchen exhaust fans available and to meet future requirements for energy efficiency. Direct Drive and Variable Speed are standard. All fans are ruggedly built with only the highest quality components and have an unmatched history for reliability and durability. For the kitchen ventilation market we offer a comprehensive line of ventilation products that include:

• Grease fans for kitchen hoods.
• Grease fans for wood-fired pizza ovens & BBQ's.
• Chimney Fans for fireplaces.

- Modulating Combustion Air System

EXHAUSTO's Modulating Combustion Air System, MCAS, is for installation and use in mechanical rooms containing heating appliances, like boilers and water heaters, or commercial laundry dryers. The purpose of the system is to provide an exactly measured amount of combustion air for the appliances and eliminate the use of gravity air louvers. It can be used in conjunction with any type of combustion system, whether a boiler, furnace, commercial dryer, etc. that is gas or oil-fired. The MCAS System maintains a perfect, constant mechanical room pressure during the combustion process by modulating the fan capacity. The system creates and maintains a preset room pressure prior to or immediately after the appliances start. It can also be set to run continuously. The system monitors the mechanical room pressure condition all of the time, and has an integrated safety function. Should the operating pressure fall more than 40% below the set point for more than 12 seconds, it deactivates the appliances to prevent a potentially hazardous situation.

- RSIF Power Venter

The EXHAUSTO RSIF Power Venter is intended for use as an in-line power venter/draft inducer. It can be installed in-line in the chimney or stack and can be used for sidewall as well as vertical venting arrangements. The RSIF Power Venter is specifically designed for applications where reliable and efficient operation, low noise level, lower energy consumption, variable speed and compact design are of utmost importance. Typical uses, but are not limited to: mechanical venting of gas-fired boilers and water heaters.

- Mechanical Draft Fan

Mechanical draft fan for installation at the chimney termination point, vertical or side-wall venting. Ensures a negative pressure in the entire chimney or stack system. Discharges vertically (horizontally, if side-wall venting) at a high velocity. The fan housing is hinged and the top can be opened for easy service and access to stack. The RSV is a component in the CASV, Chimney Automation System.