|
|
Products - Pumps
 |
- Circulator Series
The Quieter, Direct Drive cartridge type "00" Series Circulator is Self Lubricating, contains No Mechanical Seal, and requires No Maintenance. This Compact, Low Power Consumption design is ideal for high efficiency jobs. The Unique Replaceable Cartridge contains all the moving parts, and allows the circulator to be serviced instead of replacing the entire unit. Typical hydronic heating systems to 165,000 BTU's and large residential/light commercial hydronic heating systems to 215,000 BTU's.
|
 |
- 110 Red Baron R
Designed to efficiently circulate heated or chilled water in residential, commercial hydronic or solar systems. Ideal for primary-secondary systems, as well as parallel pumping designs. These circulators may also be used for zoning large installations and are available in bronze construction for fresh water and domestic hot water applications. Sizes ranging from 3/4" to 1-1/2", performance capacities up to 68GPM.
|
 |
- 1400 Series
Taco 1400 Series High Capacity Circulators are specifically designed for quiet, efficient, dependable operation in a wide range of medium to high flow/head hydronic heating, chilled water cooling and hot water recirculation applications. The space saving, close-coupled, maintenance free motor with permanently lubricated, sealed-for-life bearings, Nu-Tride® coated solid steel shaft, Noryl® impeller and durable, carbon/silicon-carbide mechanical seal provide unmatched reliability. Available in Cast Iron or Bronze construction.
|
 |
- 1600 Series
The Taco 1600 Series In-Line Pump is available in 15 models ranging in size from 1 1/2" X 1 1/2" to 2" X 2". These pumps range in performance capacity from 10 GPM to 235 GPM with head capacities up to 68'.
|
 |
- 1900 Series
The Taco 1900 Series In-Line Pump is available in 5 models ranging in size from 1 1/2" X 1 1/2" to 2" X 2". These pumps range in performance capacity from 10 GPM to 235 GPM with head capacities up to 68'. This Series of pumps is a Direct Coupled Version of the Popular & Reliable 1600 Series In-Line Circulators.
|
 |
- CI Series
CI Series Pumps provide the ultimate in reliability and ease of installation for heating, air conditioning, pressure boosting, cooling water transfer, and water supply applications. Quiet, dependable and proven performance: that's the CI Series. CI Series Pumps meet the latest standards for hydraulic performance and dimensional characteristics. Each is backed by Taco, Inc., a worldwide leader in heating and cooling equipment for more than eight decades. An easy to replace, slip-on shaft sleeve facilitates seal maintenance in the field and lowers maintenance costs. The exclusive dry shaft design protects the pump shaft by eliminating contact between the shaft and circulating fluid. Corrosion-resistant shaft materials are generally not required. CI Pumps also feature flush seal line taps, allowing the installation of a filter to protect the seal from non-condensible particles present in open systems. In addition, pressure tappings on suction and discharge connections are provided as a standard feature. Flows up to 2800GPM at heads up to 180TDH.
|
 |
- FI Series
FI Series Pumps meet the latest standards for hydraulic performance and dimensional characteristics. Each is backed by Taco, Inc., a worldwide leader in heating and cooling equipment for more than eight decades. Improved bearing frame design features sealed for life bearings meeting all industry requirements for a minimum L 10 life of 60,000 hours. Optional regreaseable bearings are also available. Improved design also incorporates a unique sealing system which prevents the migration of water into the bearing frame. An easy to replace, slip-on shaft sleeve facilitates seal maintenance in the field and lowers maintenance costs. The exclusive dry shaft design protects the pump shaft by eliminating contact between the shaft and the circulating fluid. Corrosion-resistant shaft materials are generally not required. FI Pumps also feature flush seal line taps, allowing the installation of a filter to protect the seal from non-condensible particles present in open systems. In addition, pressure tappings on suction and discharge connections are provided as a standard feature. All FI Pumps are provided with a fully welded, rigid structural steel base, with enclosed ends and open grouting area. This combination reduces vibration and improves alignment. Flows up to 4800GPM at heads up to 380TDH.
|
 |
- Vertical Inline Pumps
Taco Vertical Inline Pumps meet the latest standards for hydraulic performance and dimensional characteristics. With the addition of seven new models, Taco expands its hydraulic coverage to flows up to 3500 GPM at heads up to 300' TDH. Taco's line of Vertical Split Coupled Inline Pumps are designed for optimum performance and ease of installation and maintenance. They're ideal for HVAC and industrial applications, including pressure boosting, cooling towers, and domestic water service flows to 3500 GPM. For quick and easy repair, the split coupler design permits changing of the seal without disturbing the motor or piping. The axial load is hydraulically balanced to increase bearing life and deliver better pump efficiencies and lower NPSH requirements. The recirculating line flushes seal faces and extends seal life, resulting in less pump downtime due to seal leaks. Optimum pump efficiency is achieved by close running impeller to casing clearances. Taco's Vertical Inline Pumps come in two different styles, Split Coupled & Closed Coupled.
|
 |
- TA Series Horizontal Split Case
Maximum operating pressure of 300 PSI. The rugged, heavy-duty casing design allows higher working pressures. Quick access for service and maintenance. The top half of the casing is easily removed to allow service of rotating unit without disturbing piping system. Low NPSH requirements and increased efficiency. The impeller is specifically designed to assure minimum NPSH and maximum pump efficiency as well as stable performance throughout the operating range. Compact arrangement increases seal and bearing life. The mechanical seal option reduces the shaft length and minimizes shaft deflection, thereby increasing both seal and bearing life. Balanced axial loads for maximum bearing life. The double suction design virtually eliminates axial thrust and reduces bearing loading. The bearings are heavy-duty type, grease lubricated. No need to replace casing if wear rings require service. The case wear rings are separate from the case itself and are replaceable. Flows up to 5800 GPM at heads up to 400TDH.
|
Click on logo for direct link to manufacturer's web site. |
|