Behrmann Company

- “Compac” Hot Water Boiler Model “PCW”

• Ideal for new boiler applications or to retrofit existing installations, because it fits through many existing doorways with ease.
• Available in ratings from 15 kW to 720 kW.
• Requires less square footage floor space, and does not require horizontal clearance for element removal.
• Heavy duty / 16 gauge cabinet and flanged steel base provide greater structural strength.
• All electrical components are UL listed or recognized.
• Optional features and trim available to meet any custom design criteria.
• Individual flanged U-tube design heating element shortens down time for element replacement.
• Meets CSD-1 requirements (Units greater than 117 kW).
• Small footprint saves in building construction cost.
• Close temperature control because control sensor is located in the outlet pipe.

- “Series II” Hot Water Boiler Model “HW”

• Heavy duty 16 gauge cabinet and structural steel base provides greater strength.
• All electrical components are UL listed or recognized.
• All units meet CSD-1 requirements.
• Close temperature control because sensor is located in the outlet pipe.
• Optional features and trim available to meet any custom design criteria.
• Large control cabinets with ample room for addition of options or field mounted interfaces.  All wiring is color-coded and all electrical components are readily accessible for ease of field service.

Individual immersion heating elements are 2-1/2” square flanged for ease of replacement. The elements are made of a highly corrosion-resistant Incoloy sheath, with a nickel-chromium resistance wire packed in magnesium oxide powder, and configured in a U-tube design. Elements are available in both 1-phase and 3-phase ratings, and are limited to 75 watts per square inch power density to assure long life.

- “Series II” Model Steam Boiler Model “ST”

• Heavy duty 16 gauge cabinet and structural steel base provides greater strength.
• All electrical components are UL listed or recognized.
• All units meet CSD-1 requirements.
• Large steam chest effect high quality steam / minimum carryover.
• Optional features and trim available to meet any custom design criteria.
• Large control cabinets with ample room for addition of options or field mounted interfaces. All wiring is color-coded and all electrical components are readily accessible for ease of field service.

Individual immersion heating elements are 2-1/2? square flanged for ease of replacement. The elements are made of a highly corrosion-resistant Incoloy sheath, with a nickel-chromium resistance wire packed in magnesium oxide powder, and configured in a U-tube design. Elements are available in both 1-phase and 3-phase ratings, and are limited to 75 watts per square inch power density to assure long life.